1984-1986 Moto Park Grand Prixs

By the late 70’s the Golden Years of Canadian Motocross had come to an end, as did the boom years of Motorcycle Sales in Canada. The last Motocross Grand Prix had been held at Mosport in 1979. During the mid 80’s thru the mid 90’s sales of Motorcycles plummeted from more than 100,000 units per year to as low as 20,000.

Carl Bastedo had been successful in promoting both a series of National Consumer Motorcycle Shows throughout Canada starting in 1977 as well as Supercross starting in 1980 at Exhibition Stadium in Toronto. Bringing a World Championship Motocross Grand Prix back to Canada was a natural evolution in his mind.

Any Motorsport event requires major sponsorship in order to be successful, this is the way it is all over the World. The Supercross events actually took in more in sponsorship than they did at the gate. The financial success of the Canadian Grand Prix was doomed from the beginning as Yamaha Canada was the only major company to sponsor the event.

In spite of this, a great event was put together in 1984 on an extended Motopark track. Hundreds of loads of dead sand carved out of a “honey hole” found on the property re-surfaced the entire track. Huge D8 bulldozers where brought in to reshape the woods at the south end of the property revealing huge hills and drop offs which where a part of any GP track of the era.

Hospitality wasn’t generally a part of the travelling GP Circus at the time and Motopark was one of the first to introduce a deck overlooking the track with décor and waiters serving up Steak dinners for the local and GP VIP’s in attendance. The Township Reeve and council members where in attendance and Ontario’s Solicitor General arrived for the opening ceremonies via Helicopter which landed in the front yard of Carl’s house.

More than 3,500 spectators paid to get in bringing total attendance close to 5,000. It was the most people seen at a Motocross race in Canada since the great 500cc GP at Copetown in 1975.

All the buzz in the pits was how Canada’s Ross Pederson would fare against the GP regulars, 13 of whom made the trip. Chuckles throughout the pits as the Euro’s looked over Ross’s RM500 “Motocross” bike. On the track it was a different story as Ross challenged many of them finishing top Canadian in 4th place while Glen Nicholson, also on the RM500, was next Canadian garnering 10th.

The podium at the 1984 Grand Prix of Canada was made up of Belgian riders. The victory went to Georges Jobe (Kawasaki) followed by Andre Malherbe (Honda) and Eric Geobers, also on a Honda.

In 1985 the FIM requested that Motopark run a non points paying 250 c.c. GP as the US GP at Unadilla was the following week and they felt the European riders would like to spend the week prior acclimatizing themselves to North America. Only 4 Euro’s made the trip led by Gert Jan Van Doorn who battled with Ross Pederson taking first in Moto 1. Van Doorn suffered a flat tire in Moto 2 allowing Pederson to take the win and become the first Canadian to win a Canadian Grand Prix. American Honda’s Darryl Shultz also showed up in 1985. Shultz finished with a DNF in moto one and 3rd behind Pederson and Doug Hoover in moto 2.

Financially, the Grand Prix’s proved to be to much of a drain and Motopark informed the CMA in the fall of 1985 that it would not run another 500 c.c. World Championship round in 1986. The CMA felt obligated to produce the event and took the production over with agreement that the event would be held at Motopark.

The last Motocross Grand Prix in Canada was held in sweltering heat. The event was well produced but poorly attended. On the Podium in 1986 were Belgians Andre Malherbe, and Eric Geobers while Great Britain’s David Thorpe rounded out the top 3. Top Canadian that year was Doug Hoover and Glen Nicholson in 9 and 10th. Ross Pederson was not entered, I suspect he was injured.

It was the end of an era and the entire World GP Circuit went into a slump during the late 80’s and 90’s as Motorcycle Sales World wide continued to plummet. Slow market growth in the late 90’s led to a revival of the GP scene in early 2000.

39,175 Responses

  3. I’m not sure where you’re getting your information,
    but good topic. I needs to spend some time learning more or understanding more.
    Thanks for fantastic information I was looking for this info for my mission.

    Reply

  12. Hello there, I found your blog by means of Google at the same time as
    looking for a related topic, your site got here up, it seems to be good.

    I’ve bookmarked it in my google bookmarks.
    Hi there, just was aware of your blog through Google, and
    located that it is truly informative. I’m going
    to watch out for brussels. I’ll appreciate in the event you continue this in future.

    Lots of other people will be benefited out of your writing.
    Cheers!

    Reply

  17. В поисках достоверного источника редкоземельных металлов и сплавов? Обратите внимание на компанию Редметсплав.рф. Мы предлагаем внушительный выбор продукции, обеспечивая высочайшее качество каждого изделия.

    Редметсплав.рф обеспечивает все стадии сделки, предоставляя полный пакет необходимых документов для законного использования товаров. Неважно, какие объемы вам необходимы – от мелких партий до крупнооптовых заказов, мы готовы поставить любой запрос с высоким уровнем сервиса.

    Наша команда поддержки всегда на связи, чтобы помочь вам в выборе товаров и ответить на любые вопросы, связанные с применением и характеристиками металлов. Выбирая нас, вы выбираете достоверность в каждой детали сотрудничества.

    Заходите на наш сайт Редметсплав.рф и убедитесь, что качество и уровень нашего сервиса – наилучшее решение для вашего бизнеса.
    Наши товары:

    Заготовка из конструкционной стали листовая 100 мм Ст3Гпс ОСТ 3-1686-90 Выбирайте конструкционные заготовки высокого качества для вашего проекта на Редметсплав.рф. Наш ассортимент включает прочные и долговечные материалы, идеально подходящие для различных областей применения, включая строительство и машиностроение.

    Reply

  19. https://cl.pinterest.com/pin/953496552330315637/

    Invertir en una escuela de liderazgo virtual ya no es un extra, sino una necesidad para cualquier organizacion que busca adaptarse en el entorno VUCA.

    Un buen curso de liderazgo empresarial no solo ensena contenido, sino que impacta la manera de dirigir de mandos medios que tienen equipos a cargo.

    Por que elegir una escuela de liderazgo remota?

    Flexibilidad para progresar sin frenar el trabajo diario.

    Acceso a materiales relevantes, incluso si estas fuera de la capital.

    Precio mas accesible que una capacitacion tradicional.

    En el contexto chileno, un entrenamiento para lideres chilenos debe responder a realidades locales:

    Jerarquias marcadas.

    Colaboradores diversos.

    Hibrido presencial-remoto.

    Por eso, una actualizacion para jefes debe ser mas que un powerpoint bonito.

    Que debe incluir un buen curso de liderazgo para jefaturas?

    Clases sobre gestion emocional.

    Casos reales adaptados a contextos reales.

    Evaluacion individual de competencias.

    Interaccion con otros supervisores de regiones.

    Y lo mas clave: el curso de liderazgo empresarial debe impulsar un impacto concreto en la eficacia del liderazgo.

    Cientos de jefes llegan al puesto sin preparacion, y eso duele a sus equipos. Un buen curso de liderazgo para jefaturas puede ser la solucion entre liderar con claridad o imponer.

    Reply

  21. Hi would you mind letting me know which webhost you’re utilizing?
    I’ve loaded your blog in 3 completely different browsers and I must say this blog loads a lot quicker then most.
    Can you recommend a good hosting provider at a honest price?

    Thank you, I appreciate it!

    Reply

  27. https://postheaven.net/zorachphst/anlisis-de-clima-laboral-en-empresas-b-chilenas-alineando-propsito-con

    Visualiza esta postal frecuente en una oficina chilena: grupos quemados, cambio alta, comentarios en el pasillo como nadie pesca o puro desgaste. Suena reconocible, ¿verdad?

    Muchas pymes en Chile se obsesionan con los KPI y los reportes financieros, pero se saltan del termómetro interno: su gente. La verdad dura es esta: si no controlas el clima, al final no te lamentes cuando la salida de talento te golpee en la puerta.

    ¿Por qué cuenta tanto esto en Chile?
    El ambiente local no da tregua. Vivimos fuerte rotación en retail, estrés extremo en los call centers y quiebres generacionales gigantes en rubros como la minería y la banca.

    En Chile, donde pesa la broma interna y la onda positiva, es típico disfrazar los problemas. Pero cuando no hay credibilidad real, ese chiste se transforma en puro blablá que camufla la frustración. Sin un levantamiento, las organizaciones son ciegas. No ven lo que los trabajadores realmente critican en la máquina de café o en sus canales privados.

    Los ganancias concretos (y muy chilenos) de hacerlo bien
    Hacer un estudio de clima no es un gasto, es la mejor inversión en productividad y paz mental que puedes hacer. Los beneficios son claros:

    Menos bajas y inactividad: un lastre que le pega millones a las empresas chilenas cada periodo.

    Retención de talento emergente: las generaciones recientes cambian de pega rápido si no perciben valor y trato digno.

    Mayor output en equipos remotos: clave para equipos fuera de Santiago que a veces se perciben lejanía.

    Una diferenciación tangible: no es lo mismo prometer “somos buena onda” que probarlo con datos duros.

    Cómo se hace en la práctica (sin volverse loco)
    No requieres un equipo de RRHH enorme. Hoy, las herramientas son alcanzables:

    Encuestas anónimas digitales: lo más común desde 2020. La regla es blindar el 100% de anonimato para que la dotación hable sin temor.

    Termómetros rápidos: en vez de una encuesta larga cada 12 meses, haz una consulta semanal rápida por plataformas internas.

    Reuniones pequeñas: la herramienta top. Revelan lo que nunca saldría por email: roces entre áreas, tensiones con jefaturas, flujos que nadie domina.

    Conversaciones directas con gente de regiones: su voz suele quedar omitida. Una entrevista puede detectar problemas de comunicación que no captarías en una encuesta.

    El gran secreto: el diagnóstico no puede ser un teatro. Tiene que volverse en un roadmap tangible con objetivos, encargados y deadlines. Si no, es puro cuento.

    Errores que en Chile se repiten (y arruinan todo)

    Anunciar ajustes y no hacer nada: los colaboradores chilenos lo cachan al tiro; puro verso.

    No garantizar el confidencialidad: en ambientes muy verticales, el miedo a reacciones es real.

    Calcar encuestas genéricas: hay que aterrizar el lenguaje a la realidad local.

    Medir una vez y no seguir: el clima se mueve tras la salida de un líder clave; hay que tomar pulso de forma regular.

    Reply

  30. DoFollow Backlinks
    DoFollow links.

    A DoFollow link passes domain authority from the source site, while each link is checked thoroughly to confirm they are pure DoFollow links.

    A detailed report on completed work is provided as a .txt document containing the list of domains where your link was placed.

    It is recommended to embed links naturally using keyword-rich anchors; here are other approaches — see below:

    First option — write an original post
    Option 2 — each post is automatically rephrased to avoid duplication, since algorithms reward content diversity.

    Optimal ratio: 30% branded/keyword anchors, 70% non-anchor links.

    Reply

  36. I’ve been exploring for a little bit for any high-quality articles or blog posts on this sort of area .
    Exploring in Yahoo I at last stumbled upon this web site.
    Studying this info So i am happy to exhibit that I have a very
    good uncanny feeling I came upon just what I needed.

    I such a lot unquestionably will make sure to do not omit this site
    and provides it a glance regularly.

    Reply

  39. РедМетСплав предлагает внушительный каталог качественных изделий из ценных материалов. Не важно, какие объемы вам необходимы – от небольших закупок до масштабных поставок, мы гарантируем оперативное исполнение вашего заказа.
    Каждая единица продукции подтверждена требуемыми документами, подтверждающими их происхождение. Превосходное обслуживание – наша визитная карточка – мы на связи, чтобы улаживать ваши вопросы по мере того как находить ответы под требования вашего бизнеса.
    Доверьте ваш запрос специалистам РедМетСплав и убедитесь в множестве наших преимуществ
    поставляемая продукция:

    Круг магниевый B 776 Grade R3 – ASTM B776 Фольга магниевая B 776 Grade R3 – ASTM B776 является высококачественным материалом, который широко используется в различных промышленных приложениях. Эта магниевая фольга отличается прочностью и легкостью, что делает ее идеальным выбором для производств, где важна высокая прочность и минимальный вес. Данный продукт получил признание благодаря своим уникальным свойствам, включая отличную коррозионную стойкость и механическую однородность. Если вы хотите купить Фольга магниевая B 776 Grade R3 – ASTM B776, вы получите надежный материал, который гарантирует долговечность и эффективность в использовании.

    Reply

Leave a Reply to LewisSpeef Cancel reply

Your email address will not be published. Required fields are marked *