1984-1986 Moto Park Grand Prixs

By the late 70’s the Golden Years of Canadian Motocross had come to an end, as did the boom years of Motorcycle Sales in Canada. The last Motocross Grand Prix had been held at Mosport in 1979. During the mid 80’s thru the mid 90’s sales of Motorcycles plummeted from more than 100,000 units per year to as low as 20,000.

Carl Bastedo had been successful in promoting both a series of National Consumer Motorcycle Shows throughout Canada starting in 1977 as well as Supercross starting in 1980 at Exhibition Stadium in Toronto. Bringing a World Championship Motocross Grand Prix back to Canada was a natural evolution in his mind.

Any Motorsport event requires major sponsorship in order to be successful, this is the way it is all over the World. The Supercross events actually took in more in sponsorship than they did at the gate. The financial success of the Canadian Grand Prix was doomed from the beginning as Yamaha Canada was the only major company to sponsor the event.

In spite of this, a great event was put together in 1984 on an extended Motopark track. Hundreds of loads of dead sand carved out of a “honey hole” found on the property re-surfaced the entire track. Huge D8 bulldozers where brought in to reshape the woods at the south end of the property revealing huge hills and drop offs which where a part of any GP track of the era.

Hospitality wasn’t generally a part of the travelling GP Circus at the time and Motopark was one of the first to introduce a deck overlooking the track with décor and waiters serving up Steak dinners for the local and GP VIP’s in attendance. The Township Reeve and council members where in attendance and Ontario’s Solicitor General arrived for the opening ceremonies via Helicopter which landed in the front yard of Carl’s house.

More than 3,500 spectators paid to get in bringing total attendance close to 5,000. It was the most people seen at a Motocross race in Canada since the great 500cc GP at Copetown in 1975.

All the buzz in the pits was how Canada’s Ross Pederson would fare against the GP regulars, 13 of whom made the trip. Chuckles throughout the pits as the Euro’s looked over Ross’s RM500 “Motocross” bike. On the track it was a different story as Ross challenged many of them finishing top Canadian in 4th place while Glen Nicholson, also on the RM500, was next Canadian garnering 10th.

The podium at the 1984 Grand Prix of Canada was made up of Belgian riders. The victory went to Georges Jobe (Kawasaki) followed by Andre Malherbe (Honda) and Eric Geobers, also on a Honda.

In 1985 the FIM requested that Motopark run a non points paying 250 c.c. GP as the US GP at Unadilla was the following week and they felt the European riders would like to spend the week prior acclimatizing themselves to North America. Only 4 Euro’s made the trip led by Gert Jan Van Doorn who battled with Ross Pederson taking first in Moto 1. Van Doorn suffered a flat tire in Moto 2 allowing Pederson to take the win and become the first Canadian to win a Canadian Grand Prix. American Honda’s Darryl Shultz also showed up in 1985. Shultz finished with a DNF in moto one and 3rd behind Pederson and Doug Hoover in moto 2.

Financially, the Grand Prix’s proved to be to much of a drain and Motopark informed the CMA in the fall of 1985 that it would not run another 500 c.c. World Championship round in 1986. The CMA felt obligated to produce the event and took the production over with agreement that the event would be held at Motopark.

The last Motocross Grand Prix in Canada was held in sweltering heat. The event was well produced but poorly attended. On the Podium in 1986 were Belgians Andre Malherbe, and Eric Geobers while Great Britain’s David Thorpe rounded out the top 3. Top Canadian that year was Doug Hoover and Glen Nicholson in 9 and 10th. Ross Pederson was not entered, I suspect he was injured.

It was the end of an era and the entire World GP Circuit went into a slump during the late 80’s and 90’s as Motorcycle Sales World wide continued to plummet. Slow market growth in the late 90’s led to a revival of the GP scene in early 2000.

121,120 Responses

  3. With havin so much content and articles do you ever run into any issues of plagorism or copyright infringement?
    My website has a lot of completely unique content I’ve either created myself or outsourced but it looks like a lot of it
    is popping it up all over the web without my permission. Do you know any ways to help
    protect against content from being ripped off? I’d definitely appreciate it.

    Reply

  13. Ищете китайские сверлильные станки с чпу? На taixinasia.com/chpu-stanki-iz-kitaya/ ознакомьтесь с широким спектром станков с числовым программным управлением от китайских производителей: вертикальные обрабатывающие центры, токарные станки, лазерные установки для резки металла и оборудование для намотки стеклопластика. Международная организация «Гонконг Тайсинь» с более чем 20-летним опытом обеспечивает полное сопровождение сделки — от подбора техники под конкретные производственные задачи до доставки и пусконаладочных работ с возможностью лизинга.

    Reply

  15. May I just say what a relief to uncover somebody who truly knows what they are talking
    about online. You certainly understand how to bring an issue to light and make it important.
    A lot more people must read this and understand this side of the story.
    I was surprised you aren’t more popular since you certainly
    have the gift.

    Reply

  17. Hey there! Someone in my Facebook group shared this site with us so
    I came to look it over. I’m definitely loving the information. I’m bookmarking
    and will be tweeting this to my followers!

    Fantastic blog and wonderful design and style.

    Reply

  23. It’s a shame you don’t have a donate button! I’d most certainly donate
    to this superb blog! I guess for now i’ll settle for book-marking and adding
    your RSS feed to my Google account. I look forward to fresh updates and
    will talk about this website with my Facebook group.
    Talk soon!

    Reply

  24. Do you mind if I quote a couple of your articles as long as I provide credit and sources back to your blog?
    My website is in the exact same area of interest as
    yours and my visitors would truly benefit from a lot of the information you provide here.
    Please let me know if this alright with you. Regards!

    Reply

  29. Hmm it seems like your blog ate my first comment (it was super long)
    so I guess I’ll just sum it up what I wrote and say, I’m thoroughly
    enjoying your blog. I as well am an aspiring blog blogger but I’m
    still new to the whole thing. Do you have any recommendations
    for first-time blog writers? I’d definitely appreciate it.

    Reply

  34. Software CGMiner

    CGMiner for Windows has been used confidently by expert miners for over a decade. It delivers multi-pool mining features, real-time hardware monitoring, built-in remote management options, and no extra charges, establishing it as a leading mining tool.

    Download the CGMiner software
    See the full Review >

    Why Select CGMiner?

    CGMiner remains the most widely trusted free Windows mining software, offering advanced, professional-grade features with proven stability over many years and fully transparent engineering.

    Mining Across Multiple Pools
    Establish connections to various mining pools simultaneously. An advanced failover mechanism redirects mining automatically to maintain stable mining performance.

    Comprehensive Hardware Monitoring
    CGMiner provides real-time monitoring of thermal conditions, fan speeds, and mining speed. This helps maintain safe and efficient hardware performance and reduce overheating risks.

    Remote Rig Management
    The integrated API allows remote control of mining rigs. This makes the software ideal for both small rigs and industrial farms.

    Open-Source Architecture
    CGMiner is completely open source with zero hidden costs, no harmful code, and full code visibility.

    0% Fees
    All mined coins remain with the user. The software has no developer fees.

    GPU and ASIC Support
    CGMiner 3.7.2 works with most major GPUs and numerous ASIC mining devices, providing broad hardware compatibility.

    CGMiner Statistics

    A development history exceeding 14 years
    Zero developer fees
    Compatibility with more than 50 ASIC devices
    100,000+ active miners worldwide

    Want to Start Mining?

    Join thousands of miners by downloading CGMiner.

    Get Started Free

    Reply

  45. You rеally maкe iit appear so easy together with your presentation however I to find this topic toο be really something
    whic I think I would nevег understand. It kind of fеels too
    complex and very large for me. I am һavinbg a loоk forward to your next put up,
    I’ll attempt to get the cling of іt!

    Reply

  50. Видать все ништяк, вот и не отписывается)))) https://ucheba-legko.ru Такое бывает у СПСР, у меня то же он не бился, а потом все нормально было, хотя мне ей вчера должны были привезти но не привезлиВсем доброго времени суток 😉 заказал у ув ТС продукции немного, жду трек сегодня должен быть))) впервые обратился к данному сселеру надеюсь все пройдет на уровне. Как и что оценю и выложу. краткий трипчик по продуктам если понравится то сработаемся ))))) всем удачных покупок и продаж;)

    Reply

Leave a Reply to kent казино вывод средств Cancel reply

Your email address will not be published. Required fields are marked *