1984-1986 Moto Park Grand Prixs

By the late 70’s the Golden Years of Canadian Motocross had come to an end, as did the boom years of Motorcycle Sales in Canada. The last Motocross Grand Prix had been held at Mosport in 1979. During the mid 80’s thru the mid 90’s sales of Motorcycles plummeted from more than 100,000 units per year to as low as 20,000.

Carl Bastedo had been successful in promoting both a series of National Consumer Motorcycle Shows throughout Canada starting in 1977 as well as Supercross starting in 1980 at Exhibition Stadium in Toronto. Bringing a World Championship Motocross Grand Prix back to Canada was a natural evolution in his mind.

Any Motorsport event requires major sponsorship in order to be successful, this is the way it is all over the World. The Supercross events actually took in more in sponsorship than they did at the gate. The financial success of the Canadian Grand Prix was doomed from the beginning as Yamaha Canada was the only major company to sponsor the event.

In spite of this, a great event was put together in 1984 on an extended Motopark track. Hundreds of loads of dead sand carved out of a “honey hole” found on the property re-surfaced the entire track. Huge D8 bulldozers where brought in to reshape the woods at the south end of the property revealing huge hills and drop offs which where a part of any GP track of the era.

Hospitality wasn’t generally a part of the travelling GP Circus at the time and Motopark was one of the first to introduce a deck overlooking the track with décor and waiters serving up Steak dinners for the local and GP VIP’s in attendance. The Township Reeve and council members where in attendance and Ontario’s Solicitor General arrived for the opening ceremonies via Helicopter which landed in the front yard of Carl’s house.

More than 3,500 spectators paid to get in bringing total attendance close to 5,000. It was the most people seen at a Motocross race in Canada since the great 500cc GP at Copetown in 1975.

All the buzz in the pits was how Canada’s Ross Pederson would fare against the GP regulars, 13 of whom made the trip. Chuckles throughout the pits as the Euro’s looked over Ross’s RM500 “Motocross” bike. On the track it was a different story as Ross challenged many of them finishing top Canadian in 4th place while Glen Nicholson, also on the RM500, was next Canadian garnering 10th.

The podium at the 1984 Grand Prix of Canada was made up of Belgian riders. The victory went to Georges Jobe (Kawasaki) followed by Andre Malherbe (Honda) and Eric Geobers, also on a Honda.

In 1985 the FIM requested that Motopark run a non points paying 250 c.c. GP as the US GP at Unadilla was the following week and they felt the European riders would like to spend the week prior acclimatizing themselves to North America. Only 4 Euro’s made the trip led by Gert Jan Van Doorn who battled with Ross Pederson taking first in Moto 1. Van Doorn suffered a flat tire in Moto 2 allowing Pederson to take the win and become the first Canadian to win a Canadian Grand Prix. American Honda’s Darryl Shultz also showed up in 1985. Shultz finished with a DNF in moto one and 3rd behind Pederson and Doug Hoover in moto 2.

Financially, the Grand Prix’s proved to be to much of a drain and Motopark informed the CMA in the fall of 1985 that it would not run another 500 c.c. World Championship round in 1986. The CMA felt obligated to produce the event and took the production over with agreement that the event would be held at Motopark.

The last Motocross Grand Prix in Canada was held in sweltering heat. The event was well produced but poorly attended. On the Podium in 1986 were Belgians Andre Malherbe, and Eric Geobers while Great Britain’s David Thorpe rounded out the top 3. Top Canadian that year was Doug Hoover and Glen Nicholson in 9 and 10th. Ross Pederson was not entered, I suspect he was injured.

It was the end of an era and the entire World GP Circuit went into a slump during the late 80’s and 90’s as Motorcycle Sales World wide continued to plummet. Slow market growth in the late 90’s led to a revival of the GP scene in early 2000.

51,887 Responses

  4. Welcome to a demo article created only for trial purposes.

    It doesn’t contain serious information, but it functions as content for software testing.

    Just note that this demo post is generated and should not be used
    for real SEO.

    End of test.

    Anchor Text

    zH3nn2aiT8tjvaY0fgG5lmZrL4itE6

    Reply

  5. Welcome to a demo article created only for trial purposes.

    It doesn’t contain serious information, but it functions as content for software testing.

    Just note that this demo post is generated and should not be used
    for real SEO.

    End of test.

    Anchor Text

    zH3nn2aiT8tjvaY0fgG5lmZrL4itE6

    Reply

  24. I’m more than happy to discover this page. I want to to thank you for ones time just for this
    wonderful read!! I definitely appreciated every little bit of it and i also have
    you book marked to look at new things in your blog.

    Reply

  30. Wow that was odd. I just wrote an very long comment but after I
    clicked submit my comment didn’t show up. Grrrr… well I’m not writing all that over again.
    Anyhow, just wanted to say excellent blog!

    Reply

  33. «Зуб Доктор» — сеть стоматологических клиник Москвы и Подмосковья с полным циклом услуг: терапия, ортопедия, хирургия, имплантация All-on-4/6, ортодонтия (брекеты, элайнеры) и гигиена. Расписание — ежедневно с 9:00 до 20:00, запись онлайн и по телефону, подробнее на https://zubdoktor.ru/ — на сайте доступны разделы с ценами, акциями и профилями врачей. Современная диагностика и персональные планы лечения помогают вернуть улыбке здоровье и эстетику.

    Reply

  45. РедМетСплав предлагает широкий ассортимент высококачественных изделий из редких материалов. Не важно, какие объемы вам необходимы – от мелких партий до обширных поставок, мы гарантируем быстрое выполнение вашего заказа.
    Каждая единица продукции подтверждена всеми необходимыми документами, подтверждающими их качество. Превосходное обслуживание – наша визитная карточка – мы на связи, чтобы ответить на ваши вопросы по мере того как предоставлять решения под специфику вашего бизнеса.
    Доверьте потребности вашего бизнеса специалистам РедМетСплав и убедитесь в множестве наших преимуществ
    Наша продукция:

    Порошок магниевый M10500 – UNS Изделия из магния M10500 – UNS – это высококачественные компоненты, предназначенные для использования в различных отраслях, включая авиацию и автомобилестроение. Обладая отличными механическими свойствами и легким весом, они идеально подходят для конструкций, требующих высокой прочности при минимальном весе. Если вы ищете надежные и долговечные решения, обратите внимание на наши изделия. Вы можете купить Изделия из магния M10500 – UNS прямо сейчас и ощутить все преимущества их применения. На этот товар распространяются все необходимые сертификаты качества.

    Reply

Leave a Reply to borne électrique pour copropriété en Île-de-France Cancel reply

Your email address will not be published. Required fields are marked *